{"product_id":"14-bolt-one-ton-conversion-truss-w-pinion-guard-for-jeep-jk-rear","title":"14 Bolt One Ton Conversion Truss w\/ pinion guard for Jeep JK Rear","description":"\u003cp\u003eThe Motobilt Jeep JK rear 1 ton axle swap with pinion guard makes installing a beefy rear axle in your Jeep a breeze. When designing our kit we wanted it to be easy to install. Whether you are a professional shop or are a DIY fabricator at home, this kit will save you time and money. Our kit spans much further across the axle than other kits on the market. This allowed us to incorporate the spring mounts into the truss. You will simply bolt the pinion support onto the axle and then set all of the other components onto the top. With the aligning tabs and slots, the installation is foolproof.\u003c\/p\u003e\r\n\u003cp\u003eThe kit was designed to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks. The wheel mounting surface (WMS) will be 68 inches wide and the casting on the center differential has lots of ribbing. Do not use an axle from a van as the differential is offset. When installing this axle, remember that you will need to address things such as the 8x6.5 bolt pattern vs. the Jeep's factory 5x5 bolt pattern.\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJK Rear 1 Ton axle swap with pinion guard\u003c\/li\u003e\r\n\u003cli\u003eDesigned to work with the GM 14 bolt rear axle that was found in 1996-2006 GM 2500 and 3500 Single Rear Wheel axle trucks\u003c\/li\u003e\r\n\u003cli\u003eThe axle truss ships raw steel and will require professional welding\u003c\/li\u003e\r\n\u003cli\u003eLaser cut and CNC formed from 1\/4 inch thick steel plate\u003c\/li\u003e\r\n\u003cli\u003eIntegrated coil spring mounts with truss\u003c\/li\u003e\r\n\u003cli\u003eEasy install with no measurements needed\u003c\/li\u003e\r\n\u003cli\u003eTrack bar includes 4 mounting locations in case you change up your suspension\u003c\/li\u003e\r\n\u003cli\u003eMain truss body is one solid piece with several support beams made of 1\/4 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eCoil spring mounts have a built-in threaded nut to use with a spring retainer\u003c\/li\u003e\r\n\u003cli\u003eUpper and lower link mounts are formed so that your suspension is still in alignment once the wider axles are installed\u003c\/li\u003e\r\n\u003cli\u003eCan easily be changed if you want to run a custom suspension design\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003eWeight: 80lbs (approx.)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eT\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003ehe pinion guard will hit the factory gas tank\u003c\/strong\u003e\u003c\/span\u003e unless you stretch the wheelbase, move the rear axle back, relocate the gas tank, or do not install the pinion guard.\u003c\/li\u003e\r\n\u003cli\u003eOptional HD steel diff cover (MB4012) is NOT included but available separately in the related parts tab.\u003c\/li\u003e\r\n\u003cli\u003eBrake components such as the tone rings and ABS sensors will need to be addressed as they are not included in this kit\u003c\/li\u003e\r\n\u003cli\u003eAxle assembly shown is NOT included and is only shown for demonstration purposes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4058_-_Shipping.pdf?v=1628024689\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB4058_-_Assembly_Instructions_55092e7c-0589-4bdf-8414-c5f9ed6b0d64.pdf?v=1628024690\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003eCheck out this blog post showing how one of our customers installed their 1\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/mudtiremedia-installing-14-bolt-rear-axel-truss-pinion-guard\" target=\"_blank\"\u003e4 bolt one ton conversion truss.\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44231238942819,"sku":"MB4058","price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/2548\/0547\/files\/MB4058_B.jpg?v=1780343017","url":"https:\/\/offroadnchillstore.com\/products\/14-bolt-one-ton-conversion-truss-w-pinion-guard-for-jeep-jk-rear","provider":"Off Road n Chill Store","version":"1.0","type":"link"}