{"product_id":"4-link-suspension-mount-skid-system-for-jeep-tj-lj","title":"4 Link Suspension Mount Skid System for Jeep TJ \/ LJ","description":"\u003cp\u003eIf you are looking to swap your Jeep TJ or LJ to a 4 link suspension then this is the kit for you.  The rear utilizes a 4 link design while the front can be used as a 3 or 4 link.  This is the new 4 link assembly for the frame side on a Jeep TJ. Building high quality fabricated products for offroad vehicles is the mission. The Motobilt Jeep TJ \/ LJ Four Link Suspension Kit consists of an assembly that mounts onto the frame and houses both the upper and lower links for the front and rear 4 link suspension. This kit was designed to make it easier to install 4 linked suspension by taking out the guess work.\u003c\/p\u003e\r\n\u003cp\u003eThe kit is fabricated from high strength CNC laser cut steel plate. The main bodies where the links bolt in and the skid are all 1\/4 inch steel plate for ultimate strength. Some of the secondary plates to box in the link mounts and internal gusseting are 3\/16 inch steel plate. The design comes to you fully welded and ready to install into the Jeep. Once receiving the kit you will be required to weld the parts in place. The parts are located very easily with the factory skid plate mounting holes.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003ch4\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h4\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ \/LJ Four Link Suspension Kit\u003c\/li\u003e\r\n\u003cli\u003eFront can be run as a 3 link with a track bar also.\u003c\/li\u003e\r\n\u003cli\u003eMain bodies 1\/4 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eSecondary plates 3\/16 inch steel plate\u003c\/li\u003e\r\n\u003cli\u003eSold as kit\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eWeight: 126lbs (approx.)\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eSuggested Parts Not Included below:\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/motobilt.com\/products\/universal-transmission-cross-member-kit\" target=\"_blank\"\u003eUniversal Transmission Cross member kit par number MB3077\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRequires welding the parts in place\u003c\/li\u003e\r\n\u003cli\u003eThe front suspension can be run as a 3 link which is often used with a track bar when running a traditional steering box or hydraulic assist to prevent bump steer.\u003c\/li\u003e\r\n\u003cli\u003eIf you are utilizing hydraulic steering then you can run the front as true 4 link front. \u003c\/li\u003e\r\n\u003cli\u003eYou do NOT have to remove the body to install.\u003c\/li\u003e\r\n\u003cli\u003eIf you are trying to install a Johnny style joint in the lower link mounts then the \u003ca href=\"https:\/\/motobilt.com\/products\/reducer-spacer-weld-washer-3-4-to-5-8\" rel=\"noopener\" target=\"_blank\"\u003eMB1575\u003c\/a\u003e weld\/reducer washers will allow you to weld into the lower link mounts and convert them from a 3\/4” hole to a 9\/16” hole which is a more common size for Johnny Joint style ends.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eRecommended Suspension Joints: \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/Recomended_Heim_Joints.pdf?v=1695048835\" class=\"btn\" target=\"_blank\"\u003eSize Chart-Click Here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eThe lower links will require a heim joint with a 1 1\/4 inch threaded shank and bolt hole size of 1 inch.  The 1” bolt hole will be reduced to a 3\/4” bolt hole using 1 inch to 3\/4 inch high misalignment spacers measuring 2 5\/8 inches in width\u003c\/li\u003e\r\n\u003cli\u003eThe upper links use 7\/8 inch threaded shank heim joint with 3\/4 inch bolt hole that will be reduced to a 5\/8 inch hole using a 3\/4 inch to 5\/8 inch high misalignment spacers measuring 1 3\/4 inches in width\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cdiv class=\"field-label\"\u003e\u003cstrong\u003eKit Components: \u003c\/strong\u003e\u003c\/div\u003e\r\n\u003cdiv class=\"field-label\"\u003e\r\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\r\n\u003c\/div\u003e\r\n\u003cdiv class=\"field-items\"\u003e\r\n\u003cdiv class=\"field-item even\"\u003e\r\n\u003cp\u003e\u003cspan\u003eThe Motobilt Jeep TJ 4 link kit is very simple to install.  Once the factory spring hangers are removed you will bolt the link mount sections to the factory skid plate mounting locations.   \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e Then attach the skid plate we provide with the kit.  This kit does require welding to the frame.  It is NOT simply a bolt in kit. \u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt TJ 4 link mounting system can easily be modified to a front 3 link if required.  Simply remove the upper link mount on the front not being used.  We offer the track bar brackets that can be used also if running the front in a 3-link configuration.\u003cbr\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe kit was designed with a wheelbase range of 104 to 118 inches.  \u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe link mounts were built with strength in mind as they are completely boxed.  The skid and main sections of the link mounts are 1\/4\" steel.  The lower link mounts were designed with 1.25\" x 1\" rod ends with 1\" x 3\/4\" high misalignment spacers.  The mounting width of the lower link boxes are 2.63 wide.  Johnny Joints with the same 2.63\" mounting width can be used but may require weld washers to change the bolt hole size which is 3\/4\".\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan\u003eThe upper link mounts were designed for 7\/8\" x 3\/4\" rod ends with 3\/4\" x 5\/8\" high misalignment spacers.  The uppers will not work with Johnny Joints.  We chose the 7\/8\" rod ends to keep the mounts tight to the frame rails up front.  By doing so it allows for  many different engine setups.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/mb1517_-_shipping_318e330e-9c3a-437a-860d-19f45edc97ce.pdf?v=1740609136\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003cspan\u003eIf using an Apple device and the instructions link does not work, then click on the link below and hold down to download the link.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1517_-_Assembly_Insctrutions.pdf?v=1701284480%E2%80%9D\" class=\"btn\"\u003eInstructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44231234158691,"sku":"MB1517","price":1469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/2548\/0547\/files\/Stretch_and_Full_Width__82_of_19__preview.jpg?v=1780342893","url":"https:\/\/offroadnchillstore.com\/products\/4-link-suspension-mount-skid-system-for-jeep-tj-lj","provider":"Off Road n Chill Store","version":"1.0","type":"link"}