{"product_id":"rocker-guards-fits-comp-stretch-cut-corner-guards-w-tube-step-for-jeep-tj","title":"Rocker guards Fits Comp\/Stretch Cut Corner Guards w\/ Tube Step for Jeep TJ","description":"\u003cp\u003eThe Motobilt Jeep TJ Rocker Guards for competition or stretch cut corners with tube step are in-house laser cut from 3\/16 inch high strength steel. The Rocker Guards extend up to the bottom edge of the door and bend underneath the jeep to protect it. They completely cover the front and the back past the wheel well opening. This extra length when used with the Motobilt comp cut or stretch cut corners allows for a more proportional look and additional protection.\u003c\/p\u003e\r\n\u003cp\u003eThe slots in the bottom make it easier to wash mud and debris out. A heavy duty step is made from 1.75 inch DOM steel tube with an integrated grimple plate for additional grip when getting in and out of the Jeep. Motobilt Jeep TJ Rocker Guards are countersunk and ship bare metal with hardware included. Hardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. These work well with Motobilt competition corners PN MB1051 or stretch cut corners MB1058 Our rocker guards are formed so that they wrap under neath the body of your jeep and tie into the factory body mounts.\u003c\/p\u003e\r\n\u003cp\u003eThis allows for the ultimate in under body protection and strength. We also slot the lower portion of the rocker guards to make it easy to clean out your rockers after a hard day of wheeling.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eWeight: 85lbs (approx.)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eJeep TJ Rocker Guards for Competition and Stretch Cut Corners with tube step\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eExtends past the factory wheel well opening 1 3\/4 inches.\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e2”\u003c\/strong\u003e wheelbase stretch or more required.\u003c\/li\u003e\r\n\u003cli\u003eLaser cut from 3\/16 inch high strength steel\u003c\/li\u003e\r\n\u003cli\u003eStep is made from 1.75 inch DOM steel tube\u003c\/li\u003e\r\n\u003cli\u003eHardware 12- 5\/16 inch counter sunk bolts with flat washers and nyloc nuts. Nut serts are only used where the nut is not accessible from the backside. Reuses factory body mount bolts. The factory hardware is 7\/16”-14\u003cbr\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003eSold as pair\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eCompatible Corner Guards:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003ca href=\"https:\/\/motobilt.com\/products\/jeep-cj-yj-tj-blank-corner-guards-bare-steel-pair\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003eMB1057\u003c\/strong\u003e\u003c\/a\u003e Blank Corner Guards\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-competition-cut-corner-guards-bare-steel-pair\" target=\"_blank\"\u003e\u003cstrong\u003eMB1051\u003c\/strong\u003e\u003c\/a\u003e Comp Cut Corner Guards\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/aluminum-comp-cut-corner-guards-for-jeep-tj\" target=\"_blank\"\u003e\u003cstrong\u003eMB1051-A\u003c\/strong\u003e\u003c\/a\u003e Aluminum Comp Cut Corner Guards \u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/comp-cut-highline-rear-corner-armor-for-tj\" target=\"_blank\"\u003eMB1127\u003c\/a\u003e \u003c\/strong\u003eComp Cut Highline Corner Guards\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/motobilt.com\/products\/jeep-tj-4-inch-stretch-cut-corner-guards-97-06-wrangler-tj-bare-steel-pair\" target=\"_blank\"\u003eMB1058\u003c\/a\u003e \u003c\/strong\u003e4” Stretch Corner Guards\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eShips raw steel. Must be painted or powder coated to prevent rust.  See (\u003ca href=\"https:\/\/motobilt.com\/blogs\/first-blog\/steel-it?_pos=3\u0026amp;_sid=2ef388d16\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eSteel-It\u003c\/a\u003e)\u003c\/li\u003e\r\n\u003cli\u003eThere are a few locations where the back side cannot be accessed so a nut sert is provided and will be used in these locations\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 5\/16” nut serts use a 17\/32” drill bit to install.\u003c\/li\u003e\r\n\u003cli\u003eIf running the Motobilt front fenders, then choose the drop down menu option for our fenders.  They are shorter and have a notch cut out to clear the Motobilt fenders.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB1054_-_Customer.pdf?v=1588274689\" class=\"btn\" target=\"_blank\"\u003eProduct Components\u003c\/a\u003e\u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Standard","offer_id":44231238221923,"sku":"MB1054-S","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Notched for Motobilt TJ Front Fenders","offer_id":44231238254691,"sku":"MB1054-S-FND","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/2548\/0547\/files\/mb1054-s-1.jpg?v=1780343010","url":"https:\/\/offroadnchillstore.com\/products\/rocker-guards-fits-comp-stretch-cut-corner-guards-w-tube-step-for-jeep-tj","provider":"Off Road n Chill Store","version":"1.0","type":"link"}