{"product_id":"roll-cage-kit-for-jeep-jku","title":"Roll Cage Kit for Jeep JKU","description":"\u003cp\u003eRollovers and flops are a very real possibility to anyone that uses their Jeep off road. The factory jeep cage is constructed using stamped steel to simulate a cage look, but is no stronger than any other vehicle you see on the road today. The sport cages do increase the stiffness of the factory cage, but still rely on the factory mounting points.\u003c\/p\u003e\r\n\u003cp\u003eThe Motobilt MB3033 JKU cage kit replaces the factory stamped steel cage with 1-3\/4” DOM 0.120” wall tubing. The Motobilt cage adds A-pillars where the only support in the front was the windshield. Another set of support is added behind the rear seats that include a C-Pillar and X-bar bracing. \u003cbr\u003e\u003cbr\u003eThe Motobilt JKU cage is precision cut on a fiber laser then CNC bent to provide a consistent and tight fit to your jeep. All the tubes are 1-3\/4” DOM 0.120 wall tubes and come pre-notched and labeled to allow you to fit the cage together. All the cage mounting points are 3\/16” steel and are bent and formed to the factory tub and we have doubled the cage mounting points for four to eight allowing the load to be spread out even more in the event of a rollover. All of the hardware necessary to install the cage is grade 8 and is included with the kit. \u003cbr\u003e\u003cbr\u003eThe Motobilt JKU is a replacement of the factory cage. The Motobilt cage requires the removal of the factory cage and the new cage welded in. Every cage comes with a set of assembly instructions that will guide you how to cut out the factory cage and assemble the new Motobilt cage. We recommend assembling the cage inside the jeep then it can be removed after assembly to be powder coated or painted. \u003cbr\u003e\u003cbr\u003eThe Motobilt JKU cage was designed for the user to be able to retain all the factory seats and seat belts, while also allowing for the factory hard top to be used. Factory and aftermarket soft tops can still be used with some modification. This cage is also designed to be used with the factory doors or any aftermarket half doors.\u003cbr\u003e\u003cbr\u003eAn optional B-pillar harness bar can be added to the cage to add mounting points for a seat belt harness for the front seats. Behind the rear seat passengers, you can add the optional C-pillar harness and X-bar which will add a seat belt harness mounting location for the rear passengers while also significantly increasing the stiffness of the Motobilt JKU cage. The mentioned optional tubes are included with this kit.  They are considered optional as the installer could opt to leave them out if needed. \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e** Does NOT qualify for free shipping\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\r\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3033-Product-Components_3e837dd0-21e0-4458-bad8-93589c523e0f.pdf?v=1636752063\" target=\"_blank\"\u003eWhat's Included\u003c\/a\u003e\u003c\/p\u003e\r\n\u003ch4\u003eInstructions\u003c\/h4\u003e\r\n\u003cp\u003e\u003ca class=\"btn\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2714\/8736\/files\/MB3033-JKU-Cage-installation-instructions-2-23-2022.pdf?v=1645647150\" target=\"_blank\"\u003eAssembly Instructions\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp data-end=\"269\" data-start=\"228\"\u003eImportant Safety \u0026amp; Liability Notice\u003c\/p\u003e\r\n\u003cul data-end=\"2101\" data-start=\"271\"\u003e\r\n\u003cli data-end=\"506\" data-start=\"271\"\u003e\r\n\u003cp data-end=\"506\" data-start=\"273\"\u003e\u003cstrong data-end=\"294\" data-start=\"273\"\u003eOff-Road Use Only\u003c\/strong\u003e: This product is engineered exclusively for off-road recreational use. It is \u003cstrong data-end=\"417\" data-start=\"372\"\u003enot certified or intended for on-road use\u003c\/strong\u003e and may render your vehicle \u003cstrong data-end=\"505\" data-start=\"446\"\u003enon-compliant with federal, state, or local regulations\u003c\/strong\u003e.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"691\" data-start=\"507\"\u003e\r\n\u003cp data-end=\"691\" data-start=\"509\"\u003e\u003cstrong data-end=\"535\" data-start=\"509\"\u003eNo Guarantee of Safety\u003c\/strong\u003e: Adding a roll cage significantly improves structural rigidity, but \u003cstrong data-end=\"654\" data-start=\"604\"\u003edoes not guarantee occupant safety or survival\u003c\/strong\u003e in all rollover or impact scenarios.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"875\" data-start=\"692\"\u003e\r\n\u003cp data-end=\"875\" data-start=\"694\"\u003e\u003cstrong data-end=\"727\" data-start=\"694\"\u003eNot for Racing or Motorsports\u003c\/strong\u003e: This product is \u003cstrong data-end=\"809\" data-start=\"745\"\u003enot designed, tested, or rated for racing or motorsports use\u003c\/strong\u003e. It should not be used in competitive or high-speed environments.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"1154\" data-start=\"876\"\u003e\r\n\u003cp data-end=\"1154\" data-start=\"878\"\u003e\u003cstrong data-end=\"916\" data-start=\"878\"\u003eProfessional Installation Required\u003c\/strong\u003e: Installation must be performed by a qualified welder\/fabricator. Improper installation may compromise the integrity of the cage and vehicle, and could lead to serious injury or death. Some modification of factory panels may be required.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"1468\" data-start=\"1155\"\u003e\r\n\u003cp data-end=\"1468\" data-start=\"1157\"\u003e\u003cstrong data-end=\"1181\" data-start=\"1157\"\u003eDo Not Modify Tubing\u003c\/strong\u003e: \u003cstrong data-end=\"1240\" data-start=\"1183\"\u003eDo not drill, notch, or cut into any roll cage tubing\u003c\/strong\u003e to run wires or mount accessories. Any modifications to the tubing compromise its strength and integrity. If modification is necessary, the tube must be reinforced using a welded-in bung or the hole must be fully welded closed.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"1714\" data-start=\"1469\"\u003e\r\n\u003cp data-end=\"1714\" data-start=\"1471\"\u003e\u003cstrong data-end=\"1512\" data-start=\"1471\"\u003eAirbag and Safety System Interference\u003c\/strong\u003e: This product may interfere with or disable factory-installed safety systems such as airbags or crash sensors. The user assumes all responsibility for any required modifications and their consequences.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli data-end=\"2101\" data-start=\"1715\"\u003e\r\n\u003cp data-end=\"2101\" data-start=\"1717\"\u003e\u003cstrong data-end=\"1745\" data-start=\"1717\"\u003eNo Warranty or Liability\u003c\/strong\u003e: This product is sold \u003cstrong data-end=\"1815\" data-start=\"1768\"\u003e“as is” with no express or implied warranty\u003c\/strong\u003e, including but not limited to any warranty of merchantability or fitness for a particular purpose. \u003cstrong data-end=\"1954\" data-start=\"1915\"\u003eMotobilt, Inc. assumes no liability\u003c\/strong\u003efor injury, death, or property damage resulting from the installation or use of this product. The end user assumes all risks and responsibilities.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44231227703395,"sku":"MB3033","price":3059.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/2548\/0547\/files\/MB3033-view-1.jpg?v=1780342757","url":"https:\/\/offroadnchillstore.com\/products\/roll-cage-kit-for-jeep-jku","provider":"Off Road n Chill Store","version":"1.0","type":"link"}