{"product_id":"tomahawk-front-half-kit-with-bull-bar-for-jeep-jk-jku","title":"Tomahawk Front Half Kit with Bull Bar for Jeep JK \/ JKU","description":"\u003cp\u003eThere comes a point in a JK build where the factory front frame becomes the limiting factor.\u003c\/p\u003e\r\n\u003cp\u003eLow center of gravity setups, 05 and newer Super Duty axles, larger tires, and long travel coilovers all start competing for the same space. The MB3103 Front Half Kit replaces that compromise with structure that actually supports the direction the build is going.\u003c\/p\u003e\r\n\u003cp\u003eThis system moves the steering box forward 2 1\/8 inches and up 5\/8 inch. That upward movement corrects a common issue on low CG builds running 05 and newer Super Duty axles where the axle housing contacts the steering box at full compression. Instead of limiting up travel or raising ride height, the steering box is repositioned where it should have been from the beginning.\u003c\/p\u003e\r\n\u003cp\u003eThe kit allows for up to a 3 inch front stretch while retaining a steering box configuration. Custom steering and track bar solutions may be required depending on axle choice and overall suspension layout.\u003c\/p\u003e\r\n\u003cp\u003eWith room for up to a 3.0 16 inch coilover, the front of the Jeep is no longer forced to work around factory constraints. The structure supports long travel suspension while maintaining compatibility with JK 4 link systems.\u003c\/p\u003e\r\n\u003cp\u003eRockJock front sway bar fitment is integrated into the layout, and provisions are made for relocating ABS and electronics as required for a clean and functional install.\u003c\/p\u003e\r\n\u003cp\u003eThis is not just clearance. It is a structural reset of the front chassis.\u003c\/p\u003e\r\n\u003ch3\u003eImportant Information\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWelding required. Front half components must be welded to the factory frame.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eShips bare steel. Parts must be prepped and painted or coated prior to final installation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRelocation of ABS and electronics is required.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCustom steering and track bar solutions may be required depending on axle and stretch configuration.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eIntended for experienced fabricators.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits Jeep Wrangler JK and JKU\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eMoves steering box forward 2 1\/8 inches\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eRaises steering box 5\/8 inch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eAllows up to 3 inch front stretch\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSupports up to 3.0 inch body 16 inch travel coilovers\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eCompatible with PSC Big Bore steering box\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFits RockJock Front Sway Bar RJ-236100-101\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eWorks with all JK 4 link kits\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eNotes\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSteering and track bar modifications may vary depending on axle width and steering setup.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFinal shock clearance depends on axle selection, wheel backspacing, and overall suspension geometry.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eFull mock up at ride height and full compression is recommended prior to final welding.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cp\u003eSuper Duty axle configurations benefit from the steering box upward relocation for improved compression clearance.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Motobilt","offers":[{"title":"Default Title","offer_id":44231209025635,"sku":"MB3103-BB","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0659\/2548\/0547\/files\/MB3103-BB.jpg?v=1780341916","url":"https:\/\/offroadnchillstore.com\/products\/tomahawk-front-half-kit-with-bull-bar-for-jeep-jk-jku","provider":"Off Road n Chill Store","version":"1.0","type":"link"}